The Drive Rite Semi Air Kit is suitable for the following vehicles:-
Fiat Ducato
Citroen C25
Peugeot J5
Talbot Express
All 1998-2003 Models above
Euro Chassis 280/290
This is a complete air suspension kit including both the air suspension system i.e. bellows, piping and valves as well as the additional gauge and controls.
Designed to fit standard none extended al-ko chassis, to fit to vehicles with leaf springs.
FIRESTONE Air Bellows are used in this air suspension kit
This kit is simple to install and can be undertaken by any DIY capable person
This kit includes the DRV003 gauge addon
Installations typically require no drilling
Reduces suspension fatigue and bottoming out while increasing comfort and stability
Enables side to side levelling to allow for off centre loads, each air bag is independent to the other side.
Mounts between chassis and original suspension
The original suspension is not removed, only the bump stop itself. The semi-air systems are designed to work together with the original suspension
The Driverite air suspension can be adjusted to bring the vehicle to ride height regardless of the load (Do not exceed the Gross Vehicle Weight-GVW)
All Drive rite air kits come with two inflation schrader valves that allow for manual inflation in a similar fashion to inflating a car tyre at a service station.
The optional basic compressor and single gauge kit allows the operator to adjust the pressure. There is no need to drive to a service station as the compressor feeds directly into the air bag.
The air bellows can be inflated independently to balance the motorhome depending on loading situations.
Specifications
Cross Reference Kit Number | W21-760-2112 |
European / US Vehicle | Europe |
Average Installation Time | 1 – 2 hours |
Reviews
There are no reviews yet.